ZWO ASI 071MC PRO Camera
ZWO OFFICIAL MALAYSIA
ZWO ASI 017MC PRO ASTRONOMY CAMERA
ZWO MALAYSIA AUTHORIZED DEALER - EACH UNIT HAVE SERIAL NUMBER AND COMES WITH 2 YEARS WARRANTY. INCLUDES TEMP TESTING, SENSOR TEST, AND ALSO SPOTTING FOR LEAKING GREASE
Camera Sensor
▶IMX071
- Most famous sensor of Sony
- APS-C(1.8″) Diagonal 28.4mm
- 16M Pixel (4944×3284)
- Very low read noise: 2.3e @24db gain 3.3e @lowest gain
- 14Bit ADC: provide real 14bit Dynamic range
- Electronic shutter: no vibration problem with mechanical shutter
DDR Memory Buffer
ASI071MC Pro camera includes a 256MB DDR3 memory buffer to help improve data transfer reliability. Additionally, the use of a memory buffer minimizes amp-glow, which is caused by the slow transfer speeds when the camera is used with a USB 2.0 port.
DDR memory buffer is the main difference between ASI “Cool” and “Pro” cameras.
Astrophotography Performance
ASI071MC Pro offers very good performance for astrophotography. Low read noise, high dynamic range.
Dark Current
the Dark Current of ASI071MC Pro is better controled than before with the help of DDR buffer and new improvment of hardware design
QE Curve
We suppose the QE peak value is more than 50%.
Relative QE curve
Unique Tilt Adapter
ASI071 Pro includes unique tilt adapter. Say goodbye to tilt problems forever !
USB 3.0 Port & USB2.0 HUB
USB 3.0 Port: Provide 5Gb bandwidth to make it possible for ASI071MC Pro to run at 10 fps (14bit, normal mode) at full resolution(16Mega).
USB 2.0 HUB: Can connect with various accessories, including a filter wheel, guide camera or electronic focuser, allowing you to manage your cables better. There are two short 0.5m USB2.0 cables included with the ASI071 Pro. The hub is powered by the external power supply if you connect one.
New mechnical design and Anti-Dew Heater
The ASI071MC-PRO camera comes with a completely upgraded anti-dew and mechanical body.
The diameter of the camera body is incresed to 86mm (ASI071MC-Cool is 78mm).
▶6 screws seal the chamber
This new structure seal the CMOS chamber better.
▶anti-dew and cooling system
ASI071MC Pro has a two-stage TEC cooling system that allows deep cooling (35°C-40°C below ambient). You will need an external power supply to power the cooler. An AC-DC power adapter is not included in this package, however you can order one from here.
We recommend using a 12V/3-5A or more DC adapter for cooler power supply (2.1×5.5, center positive).
Using a battery with 9-15V is also suitable for the cooler power supply.
The anti-dew heater will heat the AR protect window to avoid any dew problems. The heat anti-dew heater power is around 3.6W and can be turn off in software to save power.
Connecting Diagram
- 2”Filter (optional)
- EOS-T2 adapter
- M42 to M48 extender 16.5mm
- M42 extender 21mm
- Focal reducer
- OAG
Mechanical Diagram
What is in the box?
ASI071MC Pro box includes all necessary cables, adapters, and manuals.
Notice:Cooled cameras need a 12v power adapter, If you don’t have one, please click this link to buy a 12V power adapter. There are 4 different standard for different contury, please choose it carefully.
https://astronomy-imaging-camera.com/product/acdc-adapter-12v-5a-for-cooled-cameras